high quality electromagnetic vibrating feeder for

electromagnetic vibrating feeder electromagnetic vibrating feeder is an requisite equipment for the auto-flow operation. It is used to carry the material from storage silo bunker or other equipment to the receiving hopper. Electromagnetic vibrating feeder can be devided into two group:open type and enclose type.We can produce electromagnetic vibrating feeder , feed hopper, and conveyor according to customers requirements. electromagnetic vibrating feeder is simply constructed, easy to operate, non-lubricating and low electric-power consumption and can control the feeding equably, so it is widly used in many areas especially for loose material. Its necessary to minimize the materials pressure to the channel based on the equipment characteristic requirments. On our factorys request, the storage hoppers effective outlet cant be one forth greater than the slot width, and the rate of material flow must be controlled within 6-18m/min. As to the heavy feeding materials, the bottom of storage hopper should be setted with high engraved board; and the plate is not allowed to be fixed on the channel body, so as not to degrade the function of the feeder. To discharge smoothly, the obliquity of storage hoppers backwall had better be designed rangeing from 55° to 65 °. Features 1).Small cubage, light weight, simple structure, easily operate and conveintly maintainance, no need to lubricate, low operating cost. 2). Low energy consumption due to the use of machinery vibrating resonance principle, the double plastid can works at low critical condition nearby resonance. 3).Higher precision of feeding for the feeder can change, open and close instantaneously 4).This series of electromagnetic vibrating feeder catches up with controlled silicon semiwave rectifying circuit, So it can adjust the feeder conveniently through changing the opening degree of controlled silicon during the useage, and also can bring the centralized and automatic controls of production flow into effect. 5).There is minor abrasion to the feeding channel because the material in it can be thrown continuously and make leaping motion forward along a parabola track. 6). This series of electromagnetic vibrating feeder is not suitable for the occasion of explosion prevention. Model Throuput (t/h) Horizontal setting Feeding size(mm) Power(kw) Weight(kg) Remarks GZ1 5 50 0.06 73 River sand as materials, the volumeweight is 1.6t/m3 GZ2 10 50 0.15 146 GZ3 25 75 0.2 217 GZ4 50 100 0.45 412 Ore as materials, the volumeweight is 2.3t/m3 GZ5 100 150 0.65 656 GZ6 150 200 1.5 1252 GZ7 250 250 3 1920 Mine for materials, the volumeweight is 2.3t/m3 GZ8 400 300 4 3040 GZ9 600 350 5.5 3750 GZ10 753 500 4.0x2 6491 GZ911 1000 500 5.5x2 7680 GZ-T100(_10) 300 5.5x2 9800 Coal for materials, the volumeweight is 0.86t/m3